有机化学实验混合教学模式的设计与实践

通过介绍混合教学模式在有机化学实验课程教学中的设计、实施情况及效果评价与反馈等内容,与大家分享混合教学模式在有机化学实验课程教学中的应用经验与思考。     

Breakthrough of 2- to 3-μm scale U–Pb zircon dating using Cameca IMS-1280HR SIMS

A zircon U–Pb dating method with a high spatial resolution of 2- to 3-μm was successfully implemented by using Cameca IMS-1280HR SIMS in this study. Homemade cathode and modified intermediate pole were used to improve the intrinsic performance of duoplasmatron ion source. An O⁻ primary beam with intensity of approximately 3 μA and stability of 0.68% over 40 minutes was achieved and could be used continuously for more than 240 hours under high current conditions. Under Gaussian illumination mode, a 2- to 3-μm O⁻ primary beam was obtained with an intensity of approximately 200 pA. Four standard zircons, namely, 91500, Temora, Plešovice, and Qinghu, were dated using the 2- to 3-μm high spatial resolution U–Pb isotopic analysis, yielding U–Pb ages consistent with their recommended values, within errors. Our work shows that zircon U–Pb dating with high accuracy and spatial resolution can be achieved, on the basis of a series of duoplasmatron modification and instrumental optimization.     

Exploring the Condensation Reaction between Aromatic Nitriles and Amino Thiols To Optimize In Situ Nanoparticle Formation for the Imaging of Proteases and Glycosidases in Cells

The condensation reaction between 6-hydroxy-2-cyanobenzothiazole (CBT) and cysteine has been shown for various applications such as site-specific protein labelling and in vivo cancer imaging. This report further expands the substrate scope of this reaction by varying the substituents on aromatic nitriles and amino thiols and testing their reactivity and ability to form nanoparticles for cell imaging. The structure–activity relationship study leads to the identification of the minimum structural requirement for the macrocyclization and assembly process in forming nanoparticles. One of the scaffolds made of 2-pyrimidinecarbonitrile and cysteine joined by a benzyl linker was applied to design fluorescent probes for imaging caspase-3/7 and β-galactosidase activity in live cells. These results demonstrate the generality of this system for imaging hydrolytic enzymes.     

Effectively promoted catalytic activity by adjusting calcination temperature of Ce-Fe-Ox catalyst for NH3-SCR

A series of Ce-Fe-O_x catalysts prepared by the different calcination temperatures (marked as CF-X, where X represented calcination temperature) were used to the selectivity catalytic reduction of NO_x by NH₃. The results explained the relationship between calcination temperature and the sulfate species over Ce-Fe-O_x, and then investigated the surface acidity and catalytic performance. The large amounts of sulfate species were formed over CF-450 and CF-550 while it was decomposed with further the increasing of calcination temperature, which resulted in the loss of surface acidity, causing a decrease in the catalytic activity over Ce-Fe-O_x. Thereby, the CF-450 catalyst showed the best catalytic activity and over 90% NO_x conversion was obtained at 244–450 °C. Besides, the favored pore structure, more Fe³⁺ active species, higher Ce³⁺ concentration and the abundance of chemical adsorbed oxygen species, as well as the surface acid sites, would together contribute to the excellent catalytic activity of CF-450 catalyst.     

Modified Burgers-Reimschuessel model for moisture-sensitive polymers

Viscoelastic properties of moisture-sensitive polymers can be significantly affected by moisture in the ambient environment, resulting in drastic changes in the properties as the absorbed moisture content increases. In this article, a simple yet important modification to the Reimschuessel model is introduced by considering both plasticization and anti-plasticization induced by water molecules. The proposed model is validated against the results of four different polymers obtained by Onogi et al., which demonstrates its capability of describing the available data. This model can be used to estimate the performance and service life of products produced using moisture-sensitive polymers. It also reveals that small amounts of diffused moisture might have a stiffening effect on the mechanical properties of hydrophilic polymers.     

Improving Photocatalytic Performance through the Construction of a Supramolecular Organic Framework

A supramolecular organic framework-type photocatalyst, named TM-SOF, is constructed by the self-assembly of cucurbit[8]uril and a tetra-arm monomer containing four N, N’-dimethyl 2,5-bis(4-pyridinium)thiazolo[5,4-d]thiazole (MPT) moieties. Benefiting from the multivalent assembly, a photocatalytically active supramolecular MPT dimer can be stably formed in TM-SOF. In addition, TM-SOF exhibits better stability against temperature, substrate, and light irradiation. As a result, TM-SOF shows a significantly improved performance for the photocatalytic aerobic oxidation of aryl boronic acids and thioethers. It is anticipated that this line of research will provide a facile approach for fabricating high-performance supramolecular photocatalysis systems.     

One-step hydrolysis for the preparation of carboxylated cellulose nanofibrils with highly stable dispersibility from pomelo peel

Cellulose - One-step acid hydrolysis was successfully employed to prepare carboxylated cellulose nanofibrils (CCNFs) from pomelo peel waste with the mixture of hydrochloric acid and citric acid...     

Metabolites from a New Actinobacteria,Herbidospora yilanensis

Chemistry of Natural Compounds -